38
3.2 Installation of the grommets
OER-Elite INSTALLATION MANUAL
Ch.3
Insert two grommets into the grommet attaching holes on each sides of the reprocessor (four
grommets in total).
Be sure to attach the grommets. Otherwise, fluid may penetrate the grommet
attaching holes and cause equipment damage.
Figure 3.1
8
Store other accessories.
Section 3.9 on page 44
9
Connect the optional accessories.
• Install the optional bar code reader (MAJ-2130)on page 45
• Install the optional printer set (MAJ-2144)on page 46
3.2 Installation of the grommets
To Next Page
Loading...
