Olympus OER-Elite - Disinfectant replacement indicator; Detergent replacement indicator; Filter replacement indicator

42
3.6 Installation of the washing case (MAJ-2121)
OER-Elite INSTALLATION MANUAL
Ch.3
The washing case is used to hold the endoscope valves in the specified position for reprocessing.
WARNING
• Do not use the washing case if any abnormality is found with it. If an abnormal
washing case is used, the reprocessing may become insufficient.
• Be sure to attach the washing case properly. Otherwise, endoscope reprocessing
may not be effective.
• Place the washing case in the washing case holder of the retaining rack, washing
case protrusion to fit on the cutout of washing case holder and ensure that it is
centered on the washing case mount of the reprocessing basin. Otherwise the
reprocessing may become insufficient.
Figure 3.5
3.6 Installation of the washing case (MAJ-2121)
Washing case
mount
Washing case protrusion
Cutout of
Washing case
holder
Washing case
holder
Washing case mount