52
4.2 Installation workflow
OER-Elite INSTALLATION MANUAL
Ch.4
See the installation workflow below.
4.2 Installation workflow
1
Install the equipment.
Section 4.3 on page 54
2
Connect the water supply hose.
Section 4.4 on page 58
3
Connect the drain hose.
Section 4.5 on page 60
4
Connect the power supply cord.
Section 4.6 on page 64
5
Confirm the power supply.
Section 4.7 on page 66
6
Inspect the RFID function.
Section 4.8 on page 69
7
Set the date and the time.
Section 4.9 on page 74
8
Install the gas filters.
Section 4.10 on page 79
9
Install the air filter.
Section 4.11 on page 90
10
Inspect air leakage from the air filter connectors.
Section 4.12 on page 96
To Next Page
Loading...
