Touch screen – Reprocessing standby screen
Select the program by pressing the program selection buttons.
No. Nomenclature Description
1 Scope 1 button Goes to the ID information screen associated with the first endoscope.
2 Model number of
scope 1
Displays the model number of the first endoscope. It is blank when the Scope ID is not
entered.
3 ID status of scope 1 Displays the input status of patient ID, physician ID, user ID, and procedure ID
associated with the first scope.
4 Scope 2 button Goes to the ID information screen associated with the second endoscope.
5 Model number of
scope 2
Displays the model number of the second endoscope. It is blank when the Scope ID is
not entered.
6 ID status of scope 2 Displays the input status of patient ID, physician ID, user ID, and procedure ID
associated with the second scope.
7 Program selection
button
Press these buttons to select the reprocessing program.
8 Program number
display
Displays the selected reprocessing program number. For details of the reprocessing
program number, refer to “Reprocessing Program” on the next page.
9 Process time Displays the process time of the selected reprocessing program.
If the scope ID is inputed with one of the following four methods, the reprocessing time
of programs extend 3 minutes.
The scope ID of the endoscope with forceps elevator
The scope ID master card
Input from the software keyboard
Recalling the pre-registerd ID
10 Alcohol flush
indicator
Indicate that the Alcohol Flush is incorporated in the reprocessing program. Alcohol
flush cannot be eliminated from the reprocessing process.
11 Heat LCG indicator Indicate that the Heat LCG is incorporated in the reprocessing program. Heat LCG
cannot be eliminated from the reprocessing process.
12 Menu button Returns to the Menu screen,
13 LCG Info. button Goes to the LCG info. screen.
To Next Page
Loading...
