46
3.10 Installation of the optional accessories
OER-Elite INSTALLATION MANUAL
Ch.3
Installation of the printer set (MAJ-2144)
If the optional printer set (MAJ-2144) is connected to the equipment, the history of each process can
printed. For details, refer to the instruction manual Section 6.10, “Printing of the reprocessing records”
in “Instructions-Operation Manual”.
To install the printer set (MAJ-2144), refer to Chapter 3, “Installation of the printer” in “MAJ-2144
Instruction Manual”.
Do not bend the AC power cord forcibly, or place heavy objectives on the AC power
cord. Doing so may damage the AC power cord and cause a fire or an electric
shock. If the AC power cord is damaged, discontinue using it and contact Olympus.
• Do not connect any other power cord and any equipment the printer power outlet
except the printer (MAJ-1937) AC power cord. Connecting anything other than the
specified power cord may result in failure or burnout of the equipment.
• Do not connect any other cable to the printer communication port except the
interface cable intended to be used with printer (MAJ-1937). Connecting except the
specified cable may result in failure or burnout of the equipment.
• The interface cable should not be sharply bent, pulled, twisted, or crushed. Cable
damage can result, and printer may not be properly communicated.
To Next Page
Loading...
