Olympus OER-Elite - Communication status indicator; Alarm indicator information button

3.7 Installation of the stylus pen holder
43
OER-Elite INSTALLATION MANUAL
Ch.3
The stylus pen offered is used to operate the touch screen of the OER-Elite.

Required items
Tabl e 3.1

Installing the stylus pen holder
3.7 Installation of the stylus pen holder
Check Required items
M4 × 10 mm cap bolt
Hex wrench (GT804300)
Stylus pen holder (RA016500)
Stylus pen (GT944200)
1 Align the two holes on the stylus pen holder
with the screw holes on the right side panel of
the equipment and secure it with two M4 ×
10 mm cap bolts using the provided hex
wrench.
Figure 3.6
2 Place the stylus pen in to the stylus holder.