3.5 Inspection of the retaining rack
41
OER-Elite INSTALLATION MANUAL
Ch.3
The retaining rack is used to hold the endoscopes in the specified position for reprocessing.
Attach the retaining rack correctly. If the retaining rack is not attached properly, the
washing case and endoscopes cannot be set properly and the endoscopes may
not be adequately reprocessed.
Make sure the retaining rack is attached properly to the reprocessing basin and that the ring of the
retaining rack fits onto the projection on the temperature sensor.
Figure 3.4
3.5 Inspection of the retaining rack
Temperature
sensor
Ring of
retaining rack
To Next Page
Loading...
