Olympus OER-Elite - 2.5 Side panel

2.7 Control panels
31
OER-Elite INSTALLATION MANUAL
Ch.2
14 MRC Check Result
button
Goes to the MRC Check Result entry screen.
No. Nomenclature Description
1 Program information Displays information about the selected reprocessing program.
Cln. Displays the cleaning time
Dis. Displays the disinfecting time.
Channel Monitor
indicator
If “PCM” is displayed, channel monitor is executed in the cleaning and disinfection
process.
If “FCM” is displayed, channel monitor is executed in the cleaning, disinfection and
rinsing process.
Auto Leak Test
indicator
If “ALT ON” is displayed, auto leak test is incorporated in the reprocessing process.
If “ALT OFF” is displayed, auto leak test is not incorporated in the reprocessing
process.
2 Display LCG Info.
Button
Press to display the disinfectant solution information on the area of No.1.
Refer to No.3.
3 LCG information Displays information about the current disinfectant solution.
LCG Cycle Count Usage count of the disinfectant solution.
LCG Usage Number of days that have elapsed since preparation of the disinfectant solution.
LCG Temp Temperature of disinfectant solution during reprocessing process.
MRC Check Result Input result of MRC check.
4 Display Program Info.
button
Press to display the information of the selected reprocessing program on the area of
No.3. Refer to No.1.
No. Nomenclature Description
1
2 4
3