Precautions for Safe Use
12
Drive Programming User’s Manual (I580-E2)
Precautions for Safe Use
• If a parameter is set incorrectly when starting up, adjusting, maintaining, or replacing, an unexpected
operation may occur. Perform the operation after enough confirmation.
• If the Drive Programming stops during multi-function output, the output status is held. Take safety
precautions such as stopping peripheral devices.
• If the clock command is used in the Drive Programming, an unexpected operation may occur due to
weak battery of the LCD Digital Operator.
Take measures such as detecting a weak battery by a check that the clock data returns to the initial
setting and stopping the inverter or programs.
When the LCD Digital Operator is removed or disconnected, Drive Programming is in a waiting status
by the clock command.
• When using the Drive Programming, check that program data is downloaded successfully before
starting operation.
Operation and Adjustment
To Next Page
Loading...
Need help?
General