4 Drive Programming Editor
4 - 24
Drive Programming User’s Manual (I580-E2)
4-9 Transferring and Verifying Programs
Program transfer and verification are possible between the inverter and the Drive Programming func-
tion of the CX-Drive. At the same time, you can also execute parameter transfer and verification.
The created programs are compiled (program-checked) and transferred (downloaded) to the inverter if
there is no error.
From the [Drive] Menu, select [Transfer]- [To Drive] to transfer (download) data.
The programs and parameters in the inverter are transferred (uploaded) to the Drive Programming.
From the [Drive] Menu, select [Transfer]- [From Drive] to transfer (upload) data.
The Drive Programming programs and parameters are compared with the data in the inverter.
From the [Drive] Menu, select [Transfer] - [Compare with Drive] to execute verification.
From the [Drive] Menu, select [Transfer] - [Selection To Drive] to transfer (download) the selected data.
From the [Drive] Menu, select [Transfer] - [Selection From Drive] to transfer (upload) the selected data.
Transfer (from PC to Inverter)
Transfer (from Inverter to PC)
Verification (between PC and Inverter)
Partial Transfer (from PC to Inverter)
Partial Transfer (from Inverter to PC)
To Next Page
Loading...
Need help?
General