Omron 3G3RX Series - Inverter Control Commands

6 Drive Programming Commands
6 - 58
Drive Programming User’s Manual (I580-E2)
6-9 Inverter Control Commands
Run FW
Command Description Argument
Makes the inverter start a forward operation.
This command is a shortcut of the “func  value”
command which is previously set as “FW :  1”.
---
Format
Flowchart method Text language method

FW :  1
Run RV
Command Description Argument
Makes the inverter start a reverse operation.
This command is a shortcut of the “func  value”
command which is previously set as “RV :  1”.
---
Format
Flowchart method Text language method

RV :  1
Stop FW
Command Description Argument
Makes the inverter decelerate to stop from a for-
ward operation.
This command is a shortcut of the “func  value”
command which is previously set as “FW :  0”.
---
Format
Flowchart method Text language method

FW :  0
Stop RV
Command Description Argument
Makes the inverter decelerate to stop from a
reverse operation.
This command is a shortcut of the “func  value”
command which is previously set as “RV :  0”.
---
Format
Flowchart method Text language method

RV :  0
FW :  1
RV :  1
FW :  0
RV :  0