4 - 11
4 Drive Programming Editor
Drive Programming User’s Manual (I580-E2)
4-2 Parts of Drive Programming Editor
4
4-2-3 Drive Programming Area
If you right-click on a flowchart block, a popup menu with more options will appear.
The following table shows the menu commands available in the flowchart program.
Command Description
[Bring To Front] Places the selected block graphically in front of other blocks.
[Send To Back] Places the selected block graphically in back of other blocks.
[Pin] Fixes the selected block to its current position in the graph. It will not be moved in
drag operations.
[Lock] Acts like [Pin] and, besides, sets the properties of the block as read-only.
[Cut] Deletes the selected block and saves it in the clipboard, for further pasting.
[Copy] Saves the selected block in the clipboard, for further pasting.
[Paste] Puts the contents previously copied in the clipboard into the design area. Note that
you can also paste them as images in other applications.
[Set Label] Sets the label name for the selected block.
[Set Subroutine] Sets the subroutine name for the selected block. This menu command is available
only for blocks for which you can set subroutines.
To Next Page
Loading...
