Omron CP1E CPU UNIT SOFTWARE - Page 312

17 Ethernet Option Board
17-28
CP1E CPU Unit Software User’s Manual(W480)
 FINS/ TCP Port Settings
 FINS/TCP Connection No.1 to 2
Each FINS/TCP connection number has 5 bytes. The configuration of the 5 bytes of data in each
number is as shown in the following diagram.
FINS/TCP Connection Setup
Offset 15 8 7 0
D1438 FINS/TCP Port Settings
D1439 FINS/TCP connection No.1 FINS/TCP connection No.1
D1440 FINS/TCP connection No.1 FINS/TCP connection No.1
D1441 FINS/TCP connection No.1 FINS/TCP connection No.2
D1442 FINS/TCP connection No.2 FINS/TCP connection No.2
D1443 FINS/TCP connection No.2 FINS/TCP connection No.2
D1444
Reserved (Always 0)
⋅⋅⋅
D1448
Bit Settings Unit operation
0 Reserved Always 0.
1 Protect setting 0: The IP address of FINS/TCP connection No.1 is not
under the protection.
1: The IP address of FINS/TCP connection No.1 is
under the protection.
2 to 4 Reserved Always 0.
5 Protect setting 0: The IP address of FINS/TCP connection No.2 is not
under the protection.
1: The IP address of FINS/TCP connection No.2 is
under the protection.
6 to 15 Reserved Always 0.
D1438 000000
0
000 000 0
1514131211109876543210
Protect setting
(Connection No.1)
Protect setting
(Connection No.2)
Destination IP address Auto-allocated
FINS node