Omron CP1L CPU - Page 125

A
A-4 CP1L Programming Examples
124 SYSMAC CP1L Getting Started Guide
Appendix
When interrupt input 0 (contact 0.04) turns ON, the following "interrupt task 140"
will be executed once. Assignment of interrupt tasks to interrupt inputs is fixed.
Interrupt input 0 will always execute interrupt task 140.
SET
NG output
sensor input 1
NG output
sensor input 2
NG output
sensor input 3
Sensor input 1
Sensor input 1
Sensor input 2
Sensor input 3
0.00
0.00
0.01
0.02
Sensor input 3Sensor input 2
0.01 0.02
PASS output
Interrupt task
140
100.00
SET
100.02
SET
100.03
SET
100.04
W07E-EN-02+CP1L+GettingStartedGuide.book Seite 124 Montag, 15. September 2008 11:15 11