Omron CP1L CPU - Page 163

A
A-4 CP1L Programming Examples
162 SYSMAC CP1L Getting Started Guide
Appendix
4. Close the PLC Settings dialog box.
 Programming Example
Serial PLC links are used for program-free linking of data in the serial PLC link
areas. The ladder program transfers the data to be linked to the data link area.
Item Boiler A (Master) Boiler B (Slave No.0) Boiler C (Slave No.1)
Communication Settings Custom
Baud 115200bps
Format 7.2.E (Default)
Mode PLC Link (Master) PLC Link (Slave)
Link Words 10 (Default) - -
PLC Link Mode Complete Link
Method
--
NT/PLC Link Max 0 (Default) - -
PLC Link Unit No. - 0 1
Boiler A
CP1L (Master)
A_Temperature data 0
3100CH
3101CH
3109CH
3110CH
3111CH
3119CH
3120CH
3121CH
3129CH
Serial PLC
link area
Input area
3189CH
0CH
1CH
2CH
100CH
A_Temperature data 1
Output area
A_Temperature data 0
A_Temperature data 1
B_Temperature data 0
B_Temperature data 1
C_Temperature data 0
C_Temperature data 1
C_Temperature data 0
Input area
C_Temperature data 1
Output area
A_Temperature data 0
A_Temperature data 1
B_Temperature data 0
B_Temperature data 1
C_Temperature data 0
C_Temperature data 1
B_Temperature data 0
Input area
B_Temperature data 1
Output area
A_Temperature data 0
A_Temperature data 1
B_Temperature data 0
B_Temperature data 1
C_Temperature data 0
C_Temperature data 1
Boiler B
CP1L (Slave No.0)
Boiler C
CP1L (Slave No.1)
W07E-EN-02+CP1L+GettingStartedGuide.book Seite 162 Montag, 15. September 2008 11:15 11