Omron fh series Hardware Manual

3 Configuration
3 - 54
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
*1. Insert the shape into  in the model number as follows.
Straight: -O
Coaxial: CO-O
*2. The working distance is the distance from the end of the lens to the sensor.
*3. The depth of field is calculated using a permissible circle of confusion diameter of 0.04 mm.
*4. The resolution is calculated using a wavelength of 550 nm.
Note 1. Fixing the lens or other reinforcement may be required depending on the installation angle or operating
environment (vibration/shock).
When fixing the lens, insulate the lens from the fixture.
2. The above specifications are values calculated from the optical design and can vary depending on
installation conditions.
Model
*1
3Z4S-LE
VS-TCH4
-65

3Z4S-LE
VS-TCH4
-110

Optical magnification (±5%) 4.0 ×
Field of
view
(±5%)
(V × H)
(mm)
FH-SC/-SM 1/3 inch equiva-
lent
1.2 × 0.9
FH-SC2M/-SM2M 2/3 inch equiva-
lent
2.8 × 3.0
FZ-SC/-S 1/3 inch equiva-
lent
1.2 × 0.9
FZ-SC2M/-S2M 1/1.8 inch equiva-
lent
1.8 × 1.3
FZ-SC5M/-S5M 2/3 inch equiva-
lent
2.1 × 1.8
WD (mm)
*2
65 110.8
Effective FNO 17.91 22.2
Depth of field (mm)
*3
0.09 0.11
Resolution (ȝm)
*4
33.73
TV distortion 0.02% 0.03%
Maximum sensor size 2/3 inch

Omron fh series Specifications

General

Type	Machine Vision System
Series	FH Series
Power Supply	24 VDC
Storage Temperature	-20 to 60°C
Humidity	35 to 85% RH (non-condensing)
Image Sensor	CMOS
Processing Speed	High-speed processing
Connectivity	Ethernet
I/O	Digital I/O
Operating System	Embedded OS
I/O Ports	Ethernet, USB