Omron fh series Hardware Manual

2 Overview of FH/FZ5 series
2 - 2
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
2-1 Overview of System
An FH/FZ5 series Sensor Controller uses pre-built packages that contain all the processing tasks (for
image input, measurement processing, displays, outputs, etc.) that are required for vision inspections.
You arrange these packaged processes in order of execution of the vision inspection.
An FH/FZ5 series Sensor Controller executes vision inspections according to user-created flows.
Additional Information
In the FH/FZ5 series Sensor Controller, a flow that contains packaged processes that are
arranged in order of execution of processing items and image processing is called a measure-
ment flow.
Processing items and measurement flows can have more than one setting. You can switch the
setting based on the scene to inspect. (Refer to the Vision System FH/FZ5 series User's Man-
ual (Cat. No. Z365).)
2-1-1 Basic System of Measurement

Omron fh series Specifications

General

Type	Machine Vision System
Series	FH Series
Power Supply	24 VDC
Storage Temperature	-20 to 60°C
Humidity	35 to 85% RH (non-condensing)
Image Sensor	CMOS
Processing Speed	High-speed processing
Connectivity	Ethernet
I/O	Digital I/O
Operating System	Embedded OS
I/O Ports	Ethernet, USB