Omron GX-ID1611 User Manual

6 Basic Specifications of Slave Units
6 - 10
GX-series EtherCAT Slave Unit User’s Manual
• Recommended Cables with Connectors
(1) Connector Model
H: Cable with Connector on One End
W: Cable with Connectors on Both Ends
(2) Type
T: Ethernet (mating section: M12, D coding)
(3) Number of Pins
4: 4 pins
(4) Contact Plating
2: Gold-plated, 0.4 μm
(5) Cable Connection Direction (M12 Connector)
1: Straight
2: Right-angle
(6) Cable Length
A: 0.3 m
B: 0.5 m
C: 1 m
D: 2 m
E: 3 m
G: 5 m
J: 10 m
K: 15 m
(7) Connectors
0: M12 plug on one end
1: M12 socket on one end and M12 plug on the other end
2: M12 plugs on both ends
C: M12 plug on one end and RJ45 plug on the other end
D: RJ45 plugs on both ends
E: M12 socket on one end and RJ45 plug on the other end
(8) Cable
K: Standard cable
KR: Flexible cable
XS5 -T 4 2  -  M  - 
―
――― ―― ― ―
(1) (2) (3)(4) (5) (6) (7) (8)

Omron GX-ID1611 Specifications

General

Brand	Omron
Model	GX-ID1611
Category	Touch terminals
Language	English