3 Functions of NB-Designer
3-102
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
5
Switch to the [Save Data History] tab and set information to be saved.
Save to Recipe Data Field: Checking this option means the data will be saved into the
address of memory for recipe memory in the PT (i.e. RW
memory).
Connect Type X axis projection
Y axis projection
Marker Properties Select the Marker graphics from the 7 available graphics SU×.
Marker Size Sets the size of Marker.
Marker Color Sets the color of Marker.
Use Grid Checking this option means the Data Log will use the background and grid effect
provided by the system, and the lines and columns of the grid to be displayed and
the color, width and type of grid line, etc. can be set respectively.
Indirect Reference of
Sampling Cycle
When periodical sampling is used, the sampling time will be read from the specified
memory.
Indirect Reference of
Number of Sampling
Points
The sampling points will be read from the specified address.
Extended Properties Descriptions
To Next Page
Loading...
Need help?
General
