3-211
3 Functions of NB-Designer
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3-7 Function Parts
3
3-7-4 Timer
Data Length: Refers to the length of the data to be transferred.
State Setting: After the time set at Execution cycle passed, when the value is written to the bit
address or word address, select the parameter.
Set Address: After the time which was set at Execution cycle passed, specify the bit address or
word address to be written.
(a) Bit Address Setting ([Memory Type] is specified to [Bit]):
To Next Page
Loading...
