Omron NB-series

3-389
3 Functions of NB-Designer
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3-16 Other Functions
3
Difference between [From start point] and [From end point]:
[From end point] specifies the top in the lower right border of the component to the starting
point to copy.
[From start point] specifies the top in the upper left corner of the component to the starting
point to copy.
24 Conveniently Use System memory
If you want to use or check the System memory, check in the [System Memory] check box in
Basic Property dialog box. The descriptions of all the bit system memories or word system
memories are listed in [Area/Variable], as shown below:
Make the right border
as the start point
Make this point as
the start point