Omron NB-series

3 Functions of NB-Designer
3-390
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
25 Simultaneously Open Multiple Projects/Cross-project Copy/Paste
Open 2 NB-Designers. Open 2 projects with different names, and then copy or paste the
current screen by using shortcuts “CTRL+C” and “CTRL+V” or selecting [Edit] - [Copy/Paste].
26 Use Notifications Function to Notify Word memory
Notifications to word memories are added in [Control Setting] tab for the Bit Button component,
Bit Switch component, and Number Input component etc.
For example, Number Input component LW0 notifies LW10 to write 100 after notification.
Set [Triggering action] in [Control Setting] as shown below:
Write Notice (Word) Notice Before Written Makes the write value written into the specified word memory
before the signal of touch component is input into the controller
successfully.
Notice After Written Makes the write value written into the specified word memory
after the signal of touch component is input into the controller
successfully.