3-11
3 Functions of NB-Designer
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3-2 Menus
3
3-2-2 Edit Menu
(12)Performing cut, copy, paste and deletion
(13)Performing the Repeat operation
An example of operation in which a bit switch component is added to the PT screen and [Undo] or
[Redo] is performed to the addition is provided as below.
Press [Undo].
Then press [Redo].
Note The software only supports single-step “Undo/Redo” operation.
Cut, Copy, Paste and Delete
After selecting one component or more, you can cut, copy, paste it or them etc, and the
corresponding icons are shown as .
Nudge
The component position can be adjusted by “Nudge” method after it is selected. The component
movement can be realized by using direction key or the corresponding [Nudge] icons. Each time the
“Nudge” button is pressed, the component will move a pixel distance accordingly. The corresponding
icons are shown as and they are “Left”, “Right”, “Up”, “Down” corresponding one-
to-one with the contents of [Nudge] in the [Edit] menu. The simple nudge method is to use the arrow
keys on the keyboard, which realizes the easy component movement.
To Next Page
Loading...
Need help?
General
