Windows Vista, Windows 7, or later version
1 Open the Control Panel from the W
indows Start Menu and then select Windows Firewall
icon.
The Windows Firewall Dialog Box is displayed.
2 Select T
urn Windows Firewall On or Off.
The Customize Settings Dialog box is displayed.
3 Clear the Block all incoming connections, including those in the list of allowed programs
Check Box and click the OK Button.
Appendices
A-37
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
A-2 Use the Sysmac Studio to Set the Tag Data Links (EtherNet/IP Connections)
A
A-2-6 Troubleshooting
To Next Page
Loading...
