Omron NX1P2 series Hardware User Manual

A
Appendices
The appendices provide the general specifications of the CPU Unit and Unit dimen-
sions.
A-1 Specifications
................................................................................................ A-2
A-2 Dimensions.................................................................................................... A-3
A-2-1 NX-series NX1P2 CPU Units ..........................................................................A-3
A-2-2 End Cover .......................................................................................................A-4
A-2-3 SD Memory Card.............................................................................................A-4
A-2-4 Option Boards .................................................................................................A-5
A-3 Version Information ...................................................................................... A-6
A-3-1 Relationship between Unit Versions of CPU Units and Sysmac Studio
Versions........................................................................................................... A-6
A-3-2 Functions That Were Added or Changed for Each Unit Version ..................... A-7
A-4 Support Functions of the CPU Units and Restrictions on the NX
Units ................................................................................................................ A-9
A-1
NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)
A

Omron NX1P2 series Specifications

General

Model	NX1P2 Series
Manufacturer	Omron
Type	Controller
CPU Units	1
Program Capacity	5 MB
Data Memory Capacity	128 KB
Ethernet Ports	1
Serial Ports	1
Built-in EtherNet/IP Port	Yes
Built-in EtherCAT Port	Yes
Built-in USB Port	Yes
SD Memory Card Slot	Yes
USB Port	1
Power Supply Voltage	24 VDC
Programming Language	Ladder, Structured Text, Function Block Diagram
Communication Protocols	EtherNet/IP, EtherCAT, Serial (RS-232C)