Omron NX1P2 series Hardware User Manual

Revision History
A manual revision code appears as a suffix to the catalog number on the front and back covers of the
manual.
W578-E1-08
Revision code
Cat. No.
Revision
code
Date Revised content
01 October 2016 Original production
02 April 2017 Made changes accompanying release of unit version 1.14 of the CPU Unit.
03 October 2017 Made changes accompanying release of unit version 1.16 of the CPU Unit.
Added Shipbuilding Standard (LR).
04 April 2018 Corrected mistakes.
05 April 2019 Made changes accompanying release of unit version 1.21 of the CPU Unit.
Corrected mistakes.
06 July 2019 Made changes accompanying release of unit version 1.40 of the CPU Unit.
07 October 2019
Added information on the NX1P2-9B£££££.
08 October 2020 Corrected mistakes.
Revision History
49
NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)

Omron NX1P2 series Specifications

General

Model	NX1P2 Series
Manufacturer	Omron
Type	Controller
CPU Units	1
Program Capacity	5 MB
Data Memory Capacity	128 KB
Ethernet Ports	1
Serial Ports	1
Built-in EtherNet/IP Port	Yes
Built-in EtherCAT Port	Yes
Built-in USB Port	Yes
SD Memory Card Slot	Yes
USB Port	1
Power Supply Voltage	24 VDC
Programming Language	Ladder, Structured Text, Function Block Diagram
Communication Protocols	EtherNet/IP, EtherCAT, Serial (RS-232C)