1 Click the Show Detail or
Show Outline Button at the lower right of the Production
Information Dialog Box.
The view will change between the Production information details and outline.
Outline View Detail View
Unit Versions of CPU Units and Sysmac Studio Versions
The functions that are supported depend on the unit version of the NX-series CPU Unit. The version of
Sysmac Studio that supports the functions that were added for an upgrade is also required to use
those functions.
Refer to A-3 Version Information on page A-6 for the relationship between the unit versions of the
CPU Units and the Sysmac Studio versions, and for the functions that are supported by each unit ver-
sion.
Versions
40
NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)
To Next Page
Loading...
