Related Manuals
The following manuals are related. Use these manuals for reference.
Manual name Cat. No. Model numbers Application Description
NX-series
NX1P2 CPU Unit
Hardware
User’
s Manual
W578
NX1P2-££££
Learning the basic
specifications of the
NX1P2 CPU Units,
including introductory
information, design-
ing, installation, and
maintenance.
Mainly hardware in-
formation is provid-
ed.
An introduction to the entire NX1P2
system is provided along with the fol-
lowing information on the CPU Unit.
• Features and system configura-
tion
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NX-series NX1P2 CPU
Unit
Built-in I/O and Option
Board
User
’
s Manual
W579
NX1P2-££££
Learning about the
details of functions
only for an NX-series
NX1P2 CPU Unit
and an introduction
of functions for an
NJ/NX-series CPU
Unit.
Of the functions for an NX1P2 CPU
Unit, the following information is pro-
vided.
• Built-in I/O
• Serial Communications Option
Boards
• Analog I/O Option Boards
An introduction of following functions
for an NJ/NX-series CPU Unit is also
provided.
• Motion control functions
• EtherNet/IP communications func-
tions
• EtherCA
T communications func-
tions
NJ/NX-series CPU Unit
Software User’
s Manual
W501
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning how to pro-
gram and set up an
NJ/NX-series CPU
Unit.
Mainly software in-
formation is provid-
ed.
The following information is provided
on a Controller built with an NJ/NX-
series CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC
61131-3 language specifications
NJ/NX-series Instructions
Reference Manual
W502
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning detailed
specifications on the
basic instructions of
an NJ/NX-series
CPU Unit.
The instructions in the instruction set
(IEC 61
131-3 specifications) are de-
scribed.
NJ/NX-series CPU Unit
Motion Control User’
s
Manual
W507
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning about mo-
tion control settings
and programming
concepts.
The settings and operation of the
CPU Unit and programming con-
cepts for motion control are descri-
bed.
NJ/NX-series
Motion Control Instructions
Reference Manual
W508
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning about the
specifications of the
motion control in-
structions.
The motion control instructions are
described.
Related Manuals
41
NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)
To Next Page
Loading...
Need help?
General
