Manual name Cat. No. Model numbers Application Description
NJ/NX-series
CPU Unit
Built-in EtherCA
T
®
Port
User
’s Manual
W505
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Using the built-in
EtherCA
T port on an
NJ/NX-series CPU
Unit.
Information on the built-in EtherCAT
port is provided.
This manual provides an introduction
and provides information on the con-
figuration, features, and setup.
NJ/NX-series
CPU Unit
Built-in EtherNet/IP
™
Port
User’
s Manual
W506
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Using the built-in
EtherNet/IP port on
an NJ/NX-series
CPU Unit.
Information on the built-in
EtherNet/IP port is provided.
Information is provided on the basic
setup, tag data links, and other fea-
tures.
NJ/NX-series
T
roubleshooting Manual
W503
NX701-
££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning about the
errors that may be
detected in an
NJ/NX-series Con-
troller
.
Concepts on managing errors that
may be detected in an NJ/NX-series
Controller and information on individ-
ual errors are described.
Sysmac Studio Version 1
Operation Manual
W504 SYSMAC
-SE2£££
Learning about the
operating procedures
and functions of the
Sysmac Studio.
Describes the operating procedures
of the Sysmac Studio.
NX-series
EtherCA
T
®
Coupler Unit
User’s Manual
W519
NX-ECC£££
Learning how to use
the NX-series Ether-
CAT Coupler Unit
and EtherCAT Slave
Terminals.
The following items are described:
the overall system and configuration
methods of an EtherCAT Slave Ter-
minal (which consists of an NX-ser-
ies EtherCAT Coupler Unit and NX
Units), and information on hardware,
setup, and functions to set up, con-
trol, and monitor NX Units through
EtherCAT.
NX-series
Data Reference Manual
W525
NX-££££££
Referencing lists of
the data that is re-
quired to configure
systems with NX-ser-
ies Units.
Lists of the power consumptions,
weights, and other NX Unit data that
is required to configure systems with
NX-series Units are provided.
NX-series
NX Units
User’
s Manual
W521
NX-ID££££
NX-IA££££
NX-OC££££
NX-OD££££
NX-MD££££
Learning how to use
NX Units.
Describes the hardware, setup meth-
ods, and functions of the NX Units.
Manuals are available for the follow-
ing Units.
Digital I/O Units, Analog I/O Units,
System Units, Position Interface
Units, Communications Interface
Units, Load Cell Input Unit, and IO-
Link Master Units.
W522
NX-AD££££
NX-DA££££
W592
NX-HAD£££
W566
NX-TS££££
NX-HB££££
W523
NX-PD1£££
NX-PF0£££
NX-PC0£££
NX-TBX01
W524
NX-EC0£££
NX-ECS£££
NX-PG0£££
W540
NX-CIF£££
W565
NX-RS££££
W567
NX-ILM£££
Related Manuals
42
NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)
To Next Page
Loading...
Need help?
General
