1-1
The NX-series Controller
The SYSMAC NX-series are next-generation machine automation controllers that provide the function-
ality and high-speed performance that are required for machine control. They provide the safety, relia-
bility, and maintainability that are required of industrial controllers.
The NX-series Controllers provide the functionality of previous OMRON PLCs, and they also provide
the functionality that is required for motion control. Synchronized control of I/O devices on high-speed
EtherCAT can be applied to safety devices, vision systems, motion equipment, discrete I/O, and more.
Especially, the NX-series NX1P2 Controller can perform I/O operation with a mounted NX Unit or Op-
tion Board, and with the built-in I/O.
OMRON offers the new Sysmac Series of control devices designed with unified communications spec-
ifications and user interface specifications. The NX-series Machine Automation Controllers are part of
the Sysmac Series. You can use them together with EtherCAT slaves, other Sysmac products, and the
Sysmac Studio Automation Software to achieve optimum functionality and ease of operation.
With a system that is created from Sysmac products, you can connect components and commission
the system through unified concepts and usability.
EtherCAT control network
Machine vision
Servo Drivers and
Inverters
Multitasking, Synchronized Control
IEC Programming
Motion controlSequence control
Sysmac Studio
Automation Software
I/O controls
Safety devices
NX-series NX1P2
Controller
1 Introduction to NX-series Controllers
1-2
NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)
To Next Page
Loading...
Need help?
General
