Omron NX1P2 series

l
Complete Controller Monitoring
The CPU Unit monitors events in all parts of the Controller, including mounted NX Units and Ether-
CAT slaves.
T
roubleshooting information for errors is displayed on the Sysmac Studio or on an NS-series PT.
Events are also recorded in logs.
l
Sysmac Studio Automation Software
The Sysmac Studio provides an integrated development environment that covers not only the Con-
troller, but also covers peripheral devices and devices on EtherCAT. You can use consistent proce-
dures for all devices regardless of the differences in the devices. The Sysmac Studio supports all
phases of Controller application, from designing through debugging, simulations, commissioning,
and changes during operation.
l
A Wealth of Simulation Features
The many simulation features include execution, debugging, and task execution time estimates on
a virtual controller.
1 Introduction to NX-series Controllers
1-5
NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)
1-1 The NX-series Controller
1
1-1-1 Features