243
GRT1-CT1(-1) Counter Units Section 7-4
1,2,3... (1) Open the Network Configuration Window in the DeviceNet Configurator.
(2) Double-click the desired Slice I/O Terminal's icon or right-click the icon
and select Parameters - Edit to display the Edit Device Parameters Win-
dow shown below.
(3) Select the desired Counter Unit from the list on the I/O Module Tab Page
and click the Edit Button. The Edit Unit Parameters Window will be dis-
played as shown below.
Functions Shared by
All Units
Refer to the following sections for the items on the General Tab Page.
Function Reference
Comment 2-3-5 Unit Comments
Unit Conduction Time 2-3-4 Unit Conduction Time Monitor
Last Maintenance Date 2-3-8 Last Maintenance Date
To Next Page
Loading...
