244
GRT1-CT1(-1) Counter Units Section 7-4
■ Default Settings
The Default Setting Button on the General Tab Page will download the default
settings for all parameters on all tabs to the Counter Unit.
Setting Digital Output
Functions
A Counter Unit supports one digital output. Use the following procedure to set
functionality. The digital output can also be controlled according to the counter
value in comparison to a user-set range. Refer to Range 0 Tab Page on
page 250 for details.
1,2,3... 1. Click the OUT Tab in the Edit Unit Parameters Window to display the OUT
Tab Page shown below.
2. Select the digital output (No. 00) and click the Edit Button. The Edit Termi-
nal Dialog Box will be displayed.
To Next Page
Loading...
