9
Precautions for Safe Use
îš„ Operation and Adjustment Precautions
îš„ Maintenance and Inspection Precautions
Confirm that no adverse effects will occur in the system before performing the test operation.
Not doing so may result in equipment damage.
Check that the newly set parameters function properly before the actual operation.
Not doing so may result in equipment damage.
Do not make any extreme adjustments or setting changes.
Doing so may result in injury.
Check for the proper operation of the Servomotor separately from the mechanical system
before connecting it to the machine.
Not doing so may cause injury.
When an alarm occurs, remove the cause, reset the alarm after confirming safety, and then
resume operation.
Not doing so may result in injury.
Do not use the built-in brake of the Servomotor for ordinary braking.
Doing so may result in malfunction.
Do not operate the Servomotor connected to a load that exceeds the applicable load inertia.
Doing so may result in malfunction.
Resume operation only after transferring to the new Unit the contents of the data required
for operation restart.
Not doing so may result in equipment damage.
Do not dismantle or repair the product.
Doing so may result in electric shock or injury.
Caution
Caution
To Next Page
Loading...
Need help?
General
