Onkyo TX-8470 User Manual

36
Playback
Basic Operations
Turning the power on
1. Press ON/STANDBY on the remote controller to turn on the power of the
unit.
• If there is no response to the remote controller, press the REMOTE MODE
MAIN button at the top of the remote controller once to switch the remote
controller to the main mode.
You can also turn on the power of the unit with the following operations:
– Pressing ON/STANDBY on the main unit.
– Using the Onkyo Controller app ( →p33)
– Using the linking function (HDMI CEC) ( →p38)
Selecting a source to play
1. Press an input selector button on the remote controller to select a source.
For example, to play the device connected to the BD/DVD jack, press the BD/
DVD button. To listen to the audio of the TV, press TV/TAPE button.
• If there is no response to the remote controller, press the REMOTE MODE
MAIN button at the top of the remote controller once to switch the remote
controller to the main mode.
You can also select a source to play with the following operations:
– Turning the INPUT dial on the main unit.
– Using the Onkyo Controller app ( →p33)

Onkyo TX-8470 Specifications

General

Brand	Onkyo
Model	TX-8470
Category	Receiver
Language	English