Onkyo TX-8470

52
Playback
Alexa is a cloud-based voice service developed by Amazon. When this unit is
registered with an Amazon account, you can use a terminal with Amazon Alexa
(an Amazon Echo, etc.) or Amazon Alexa App (available on iOS and Android™)
to perform operations such as adjusting the volume of this unit or playing music
using voice commands.
• You need an Amazon account to use Amazon Alexa. For more information,
see the Amazon website.
• The services may not be available, depending on your area of residence.
Registering this unit with an Amazon
account
1. Register with the Amazon account on Onkyo Controller. This cannot be set
with operations on this unit.
Refer to "1. Install the app" ( →p33) for information about the app.
2. Start Onkyo Controller and tap the unit when displayed.
3. Tap "NET" or "NETWORK" on the upper part of the Onkyo Controller’s
screen to switch to the network menu.
4. Tap the "amazon Alexa" icon.
• If the login screen is not displayed, but rather a screen prompting updates
or installation of the ID authentication app (Service Unlocker), then follow

󰀨
5. Tap "Start Setup", and in the Setup screen, select the language and register
the device name. Select the same language as the one you have selected
for your other terminals with Amazon Alexa (an Amazon Echo, etc.). For the
device name, use one that can easily be called up vocally.
For example: Speaker
6. Tap "Next" to display the Amazon Alexa screen.
Amazon Alexa