Onkyo TX-8470

66
Playback
Playing music les saved on a USB storage device

Onkyo Controller ( →p33) is convenient for controlling the playback of music
stored on a USB storage device. It can be used on a smartphone or tablet to
which you have downloaded Onkyo Controller (for use on iOS and Android™).
Playing Back
Perform the following procedure when this unit is on.
1. Switch the input on the TV to the input connected to the unit.
2. port on the
front panel or rear panel of this unit.
3. Press NET to display the network service list screen.
4. Select "USB Front" or "USB Rear" with the cursors, and then press ENTER.
• If the "USB" indicator blinks on the display, check whether the USB storage
device is plugged in properly.
• Do not unplug the USB storage device while "Connecting..." is being
displayed on the display. This may cause data corruption or malfunction.
5. 
the USB storage device is displayed. Select the folder with the cursors, and

6. 
playback.
• To return to the previous screen, press RETURN.
• Characters that cannot be displayed on this unit appear with "".
• The USB port of this unit complies with the USB 2.0 standard. The transfer
󰀩
etc. may occur.
• 
may not be displayed correctly.
• This unit supports the gapless playback of the USB storage device in the
following conditions.

same format, sampling frequency, the number of channels and quantization
bit rate.