Onkyo TX-8470

44
Playback
Listening To the Radio
AM FM DAB
You can receive AM (North American models)/FM (North American and
European models)/DAB (European models) radio on this unit with the built-in
tuner.
Listening To the AM/FM Radio
Perform the following procedure when this unit is on.
 Tuning Automatically
1. Press the TUNER button on the remote controller repeatedly to select either
"AM" or "FM".
2. Press the TUNING MODE button on the main unit repeatedly to display
"TunMode: Auto" on the display.
TunMode:Auto
3. When you press the cursors / UP/DOWN, automatic tuning starts, and
searching stops when a station is found. When tuned in to a radio station,
the "TUNED" indicator on the display lights up. When tuned in to an FM radio
station, the "FM ST" indicator lights up.
When FM broadcasts reception is poor: Perform the procedure for "Tuning
Manually" ( →p44). Note that if you tune manually, the reception for FM
broadcasts will be monaural rather than stereo, irrespective of the sensitivity of
the reception.
 Tuning Manually
Note that if you tune manually, the reception for FM broadcasts will be monaural
rather than stereo, irrespective of the sensitivity of the reception.
1. Press the TUNER button on the remote controller repeatedly to select either
"AM" or "FM".
2. Press the TUNING MODE button on the main unit repeatedly to display
"TunMode: Manual" on the display.
TunMode:Manual
3. While pressing the cursors / UP/DOWN, select the desired radio station.
• Each time you press the cursors / UP/DOWN, the frequency changes
by 1 step. If the button is held down, the frequency changes continuously,
and if the button is released, the frequency stops changing.