Onkyo TX-8470

57
Playback
Connecting the Sonos System for Playback
Connecting this unit and Sonos Port allows you to send the music or music
sources on the Sonos App to this unit. Through Sonos Port, you can play this
unit with the same group of another Sonos device on the network or can play
only on this unit. Also, if you start to play music from Sonos App, this unit is
automatically turned on and the link function to switch input works.
• 󰀨
this unit on manually, and press the NET button on the remote controller. In
the factory default setting, the Network Standby function ( →p80) is set to
On.
• You can register a maximum of 2 Sonos Port.
Necessary Equipment
• Sonos Port
• RCA audio cable (supplied with Sonos Port)
How to Connect This Unit and Sonos Port
1. Connect the Sonos Port to the AUDIO IN jack of this unit with the RCA audio
cable supplied with the Sonos Port. Any input jacks other than the PHONO
jack can be used.
• A digital cable can also be connected. For details, refer to the instruction
manual of Sonos.
Setting Up
A setup is required to play Sonos on this unit. Make the setting according to the
following procedure.
1. Press the SETUP button on the remote controller, select "5. Works with
SONOS", and press the ENTER button.
2. Select the following items with the cursors / UP/DOWN and set each
item.
Input Selector:
Enable the interlocking function with the Sonos Port. With the cursors /
LEFT/RIGHT, select the input selector to which the Sonos Port is connected.
Connected Device:
Press the ENTER button to display Sonos devices connected to the same
network as the network of this unit. Select the Sonos Port connected to the
unit and press the ENTER button.
• Products (e.g. Play:3 unequipped with an output terminal) other than the
Sonos Port are also displayed in the device list and selectable. In that
case, when playback on the Sonos side starts, the input is switched,
however, audio is not output. Select the room name of the connected
Sonos Port.
• Up to 32 devices can be displayed on the Sonos product list screen. If you

󰀨