94
Troubleshooting
Troubleshooting
Power
The unit turns o unexpectedly
• If "2. Control" - "Auto Standby" on the Setup menu is activated, the unit automatically enters the standby mode.
•
the unit decreases. Then, turn the power on again.
WARNING: If smoke, smell or abnormal noise is produced by the unit, unplug the power cord from the outlet immediately, and contact the dealer or
( →p80)
Audio
•
• Make sure that none of the connecting cables are bent, twisted, or damaged.
• If "MUTING" is displayed on the display and MUTE is blinking, press the MUTING button on the remote controller to cancel muting.
• While headphones are connected to the PHONES jack, no sound is output from the speakers.
No sound from the TV
• Change the input selector on this unit to the position of the terminal to which the TV is connected.
• or analog
audio cable.
( →p24)
No sound from a connected player
• Change the input selector on this unit to the position of the jack to which the player is connected.
• Check the digital audio output setting on the connected device. On some game consoles, such as those supporting DVD, the default setting may
• For some DVD-Video discs, you need to select an audio output format from a menu.
Speakers produce no sounds
•
• Make sure that the speaker cables are not shorting out.
• Check "Connect the Speaker Cables" ( →p18) to see if the speaker connections have been made correctly.
( →p18)
To Next Page
Loading...
