80
SetupSetup
2. Control
Auto Standby (Default Value: On/O)
This setting allows the unit to enter standby mode automatically after 20 minutes
of inactivity without any video or audio input.
• Default values vary depending on the regions.
On The unit will automatically enter standby mode ("AUTO STBY"
will light).
• "Auto Standby" is displayed on the main unit’s display and
TV screen 30 seconds before entering standby mode.
The unit will not automatically enter standby mode.
Auto Standby in HDMI Standby Through (Default Value: On/O)
Enable or disable "Auto Standby" while "HDMI Standby Through" is on.
• Default values vary depending on the regions.
On The setting will be enabled.
• This setting cannot be set to "On" if "Auto Standby" and
The setting will be disabled.
Audio Return Channel (Default Value: On)
You can enjoy the sound of an HDMI-connected ARC-compatible TV through
the speakers connected to the unit.
On When enjoying the TV sound through the speakers connected
to the unit
When the ARC function is not used
Network Standby (Default Value: On)
When this function is set to "On", the network function works even in standby
state, and you can turn on the power of the unit via network using an
application such as Onkyo Controller that can control this unit.
• When this function is set to "On", the power consumption in standby state
increases, however, the increase in power consumption is minimized
by automatically entering the HYBRID STANDBY mode where only the
any of the HDMI CEC ( →p79), HDMI Standby Through ( →p79) and
Bluetooth Wakeup ( →p80) functions is enabled, this function will be in
"On" state regardless of the setting.
• When connection to the network is lost, "Network Standby" may be disabled
to reduce power consumption. In such a case, turn the unit on by using the
power button on the remote controller or main unit.
Bluetooth Wakeup (Default Value: O)
This function wakes up the unit on standby by connecting a Bluetooth enabled
On When this function is used
• When this function is set to "On", the power consumption
in standby state increases, however, the increase in power
consumption is minimized by automatically entering the
HYBRID STANDBY mode where only the essential circuits
operate.
When this function is not used
•
•
• Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be
selected. It can be selected when the network function is activated.
To Next Page
Loading...
