Onkyo TX-8470

87
Setup
6. Firmware Update
 Update Notice (Default Value: Enable)

Enable Notify updates
Disable Do not notify updates
 Version (Default Value: -)

 Update via NET (Default Value: -)

• This setting cannot be selected if you do not have Internet access or there is

 Update via USB (Default Value: -)

• This setting cannot be selected if a USB storage device is not connected or

• Wait for a while if "6. Firmware Update" cannot be selected. It can be selected
when the network function is activated.
7. Lock
Lock the Setup menu so that the settings cannot be changed.
 Setup Parameter (Default Value: Unlocked)
Lock the Setup menu so that the settings cannot be changed.
Locked The menu is locked.
Unlocked The menu is unlocked.