38
Playback
Switching speakers
When you have connected two sets of speakers to this unit, you can select
which set to output the sound.
1. Press SPEAKER A/B on the remote controller.
The selection changes in the order SPEAKER A, SPEAKER B, SPEAKER
• If there is no response to the remote controller, press the REMOTE MODE
MAIN button at the top of the remote controller once to switch the remote
controller to the main mode.
You can also switch speakers with the following operations:
– Pressing SPEAKER A/B on the main unit
Using the linking function (HDMI CEC)
By using an HDMI cable and connecting to a TV that is compatible with the
HDMI CEC (Consumer Electronics Control) function, you are able to perform
Disc player, Game consoler, etc. that is compatible with the HDMI CEC function,
input switching is performed automatically.
• HDMI CEC settings ( →p79) (the default value is "On")
• For information about the HDMI CEC functions of the TV, refer to the
operating instructions, etc., for the TV.
• The unit is designed to link with products that comply with the CEC standard,
and that linked operation is not always guaranteed with all CEC devices.
• For linked functions to work properly, do not connect CEC-compliant devices
exceeding the connectable number to the HDMI jack as shown below.
– Blu-ray Disc/DVD players: up to 3 units
– Blu-ray Disc/DVD recorders: up to 3 units
– Cable TV tuner, terrestrial digital tuner, and satellite broadcasting tuner: up
to 4 units
To Next Page
Loading...
