Onkyo TX-8470

37
Playback
Adjusting the volume
1. Press the VOLUME buttons on the remote controller to adjust the volume.
󰀨
cancel.
• If there is no response to the remote controller, press the REMOTE MODE
MAIN button at the top of the remote controller once to switch the remote
controller to the main mode.
• Depending on the video signal, the volume bar on the TV screen changes
from blue to magenta.
You can also adjust the volume with the following operations:
– Using the VOLUME dial on the main unit
– Using the Onkyo Controller app ( →p33)
– Using the linking function (HDMI CEC) ( →p38)
Adjusting the sound quality and left/right
volume balance
1. Press AUDIO on the remote controller.
2. Press the cursor buttons / UP/DOWN to select the item, then use
the / LEFT/RIGHT buttons to change the settings.
Bass: Enhance or moderate the low pitched range. *1
Treble: Enhance or moderate the high pitched range. *1
Balance: Adjust the balance of the sounds output from the left and right
speakers.
Direct: Enable/disable the Direct function which outputs pure sound as it was
intended by bypassing the tone control circuits during play.
3. To exit the settings, press RETURN.
• If there is no response to the remote controller, press the REMOTE MODE
MAIN button at the top of the remote controller once to switch the remote
controller to the main mode.
*1 It cannot be set if the listening mode is Pure Audio or Direct.
You can also adjust the sound quality with the following operations:
– Turning the BASS, TREBLE, and BALANCE dials on the main unit
– Using the Onkyo Controller app ( →p33)