65
Playback
Using MY INPUT
BALANCE
SETUP ENTER RETURN
1 2 3 4
MY INPUT
L R
You can register a variety of settings, such as the current input selection or
listening mode, in the 4 MY INPUT presets, and then recall these easily.
For example: Press the MY INPUT button to automatically switch input to
“TUNER” and start receiving the registered station. It also switches to the
registered listening mode and volume level.
Regarding the settings that can be
registered
– Input selection (It is also possible to register Network services and DAB
(European models)/AM (North American models)/FM radio stations.)
– Listening modes
– Volume level (“82” is the upper limit)
– Output destination (Multi Zone)
– TREBLE/BASS/BALANCE, etc.
*If an AM/FM/DAB radio station is registered, the TUNER preset numbers “37”,
“38”, “39”, and “40” ( →p48) are overwritten.
Registering
With the unit in the state you want to register, perform the following procedure:
1. Press and hold one of the MY INPUT buttons 1 to 4.
2. “Preset Written” appears on the display and the settings are registered.
Content is overwritten if there was any already registered.
Using the registered settings
1. Press one of the MY INPUT buttons 1 to 4.
• Even when the main unit is in standby mode, it comes ON when you press
the MY INPUT button.
To Next Page
Loading...
