43
Playback
Playing Back
1. Do the play operations on the AV component connected to this unit. Do the
play operations on this unit when the input is TUNER or NET.
• If "Variable" has been selected for the "Output Level", the volume can be
adjusted on this unit. Adjust to a suitable volume on the connected Bluetooth
wireless technology enabled device beforehand. If "Fixed" is selected, adjust
the volume on the Bluetooth wireless technology enabled device.
• You cannot transmit audio to multiple Bluetooth wireless technology enabled
devices from this unit.
• The coverage area is approx. 48´/15 m. Note that connection is not always
guaranteed with all Bluetooth enabled devices.
•
following cases, when this unit detects a paired Bluetooth wireless technology
enabled device, it will automatically reconnect with that device.
– When the power is turned on again after the unit is switched to standby
– While other than "BLUETOOTH" is selected
– When the "NET" input is selected and there is audio output from a network
service/content (some services excluded)
the connection. Also disconnect on the receiving device (if disconnection is
possible on the receiving device).
• Audio cannot be output from a Bluetooth wireless technology enabled device
in the following cases:
–
– When playing audio from one of the following network services:
Chromecast built-in, Amazon Alexa, AirPlay
*The services may not be available, depending on your area of residence.
• Sound quality adjustments and listening modes of this unit cannot be applied
to the output audio.
• This function can be used in the main room (where this unit is located). This
from a separate room (ZONE 2).
To Next Page
Loading...
