63
Playback
Selecting a source to play in ZONE 2
1. Press REMOTE MODE ZONE 2 once on the remote controller.
• The remote controller switches to the mode for controlling ZONE 2.
2. Press an INPUT SELECTOR button to select a source.
1 2
• To control on the main unit, after pressing the ZONE 2 button on the main
unit, turn the INPUT dial to select the source to play.
To play the source currently selected in ZONE 2, press the ZONE 2 button
twice.
Adjusting the volume in ZONE 2
When using an integrated amplier that has a volume control
When connecting an integrated amplier that does not have a volume
control
1. Press REMOTE MODE ZONE 2 once on the remote controller.
• The remote controller switches to the mode for controlling ZONE 2.
2. Press the VOLUME buttons to adjust the volume in ZONE 2.
1 2
•
in the Setup menu, set "Zone 2 Output Level" ( →p78) to "Variable". If you
do not set this, the volume output will be very loud and there is a danger of
• To control on the main unit, after pressing the ZONE 2 button on the main
unit, turn the VOLUME dial to adjust the volume.
To Next Page
Loading...
