Chapter 7: Alerts and Logging
156 Console Server & RIM Gateway User Manual
7.2.7 Cellular Data
This check monitors the aggregate data traffic inbound and outbound through the cellular modem as an Auto-Response
trigger event.
Click on Cellular Data as the Check Condition
Note: Before configuring cellular data checks in Auto-Response the internal or external USB cellular modem must be
configured and detected by the console server
7.2.8 Custom Check
This check allows users to run a nominated custom script with nominated arguments whose return value is used as an
Auto-Response trigger event:
Click on Custom Check as the Check Condition
Create an executable trigger check script file e.g. /etc/config/test.sh
#!/bin/sh
logger "A test script"
logger Argument1 = $1
logger Argument2 = $2
logger Argument3 = $3
logger Argument4 = $4
if [ -f /etc/config/customscript.0 ]; then
rm /etc/config/customscript.0
exit 7
fi
touch /etc/config/customscript.0
exit 1
Refer online FAQ for a sample web page html check and other script file templates
Enter the Script Executable file name (e.g. /etc/config/test.sh)
Set the Check Frequency (i.e. the time in seconds between re-running the script) and the Script Timeout (i.e.
the maximum run-time for the script)
Specify the Successful Return Code. An Auto-Response is triggered if the return code from the script is not this
value
Enter Arguments that are to be passed to the script (e.g. with a web page html check script, these Arguments
might specify the web page address/DNS and user logins)
Check Save Auto-Response
To Next Page
Loading...
