Opengear ACM5000 User Manual

Chapter 14: Command Line Configuration
252 Console Server & RIM Gateway User Manual
Add power device host
To add a UPS/RPC network host with the following details:
IP address/ DNS name 192.168.2.5
Host name remoteUPS
Description UPSroom3
Type UPS
Allowed services ssh port 22 and https port 443
Log level for services 0
Issue the commands below:
# config -s config.sdt.hosts.host4.address=192.168.2.5
# config -s config.sdt.hosts.host4.name=remoteUPS
# config -s config.sdt.hosts.host4.description=UPSroom3
# config -s config.sdt.hosts.host4.device.type=ups
# config -s config.sdt.hosts.host4.tcpports.tcpport1=22
# config -s config.sdt.hosts.host4.tcpports.tcpport1.loglevel=0
# config -s config.sdt.hosts.host4.udpports.udpport2=443
# config -s config.sdt.hosts.host4.udpports.udpport2.loglevel=0
The loglevel can have a value of 0 or 1.
The default services that should be configured are: 22/tcp (ssh), 23/tcp (telnet), 80/tcp (http), 443/tcp (https), 1494/tcp
(ica), 3389/tcp (rdp), 5900/tcp (vnc)
Add other network host
To add any other type of network host with the following details:
IP address/ DNS name 192.168.3.10
Host name OfficePC
Description MyPC
Allowed sevices ssh port 22,https port 443
log level for services 1
Issue the commands below. If the Host is not a PDU or UPS power device or a server with IPMI power control then leave
the device type blank:
# config -s config.sdt.hosts.host4.address=192.168.3.10
# config -s config.sdt.hosts.host4.description=MyPC
# config -s config.sdt.hosts.host4.name=OfficePC
# config -s config.sdt.hosts.host4.device.type='' (leave this value blank)
# config -s config.sdt.hosts.host4.tcpports.tcpport1=22
# config -s config.sdt.hosts.host4.tcpports.tcpport1.loglevel=1
# config -s config.sdt.hosts.host4.udpports.tcppport2=443
# config -s config.sdt.hosts.host4.udpports.tcpport2.loglevel=1
If you want to add the new host as a managed device, make sure to use the current total number of managed devices + 1,
for the new device number.
To get the current number of managed devices:
# config -g config.devices.total
Assuming we already have one managed device, our new device will be device 2. Issue the following commands:
# config -s config. devices.device2.connections.connection1.name=192.168.3.10
# config -s config. devices.device2.connections.connection1.type=Host
# config -s config. devices.device2.name=OfficePC
# config -s config. devices.device2.description=MyPC

Opengear ACM5000 Specifications

General

Brand	Opengear
Model	ACM5000
Category	Gateway
Language	English