User Manual
Advanced Console Server & RIM Gateway User Manual 5
4.1 Configure Serial Ports 50
4.1.1 Common Settings 51
4.1.2 Console Server Mode 52
4.1.3 SDT Mode 56
4.1.4 Device (RPC, UPS, EMD) Mode 56
4.1.5 Terminal Server Mode 57
4.1.6 Serial Bridging Mode 57
4.1.7 Syslog 58
4.1.8 NMEA Streaming 58
4.2 Add/ Edit Users 59
4.2.1 Set up new Group 60
4.2.1 Set up new Users 61
4.3 Authentication 63
4.4 Network Hosts 63
4.5 Trusted Networks 64
4.6 Serial Port Cascading 65
4.6.1 Automatically generate and upload SSH keys 66
4.6.2 Manually generate and upload SSH keys 67
4.6.3 Configure the slaves and their serial ports 68
4.6.4 Managing the slaves 69
4.7 Serial Port Redirection (PortShare) 70
4.8 Managed Devices 71
4.9 IPsec VPN 73
4.9.1 Enable the VPN gateway 73
4.10 OpenVPN 75
4.10.1 Enable the OpenVPN 76
4.10.2 Configure as Server or Client 77
4.10.3 Windows OpenVPN Client and Server set up 80
4.11 PPTP VPN 84
4.11.1 Enable the PPTP VPN server 84
4.11.2 Add a PPTP user 86
4.11.3 Set up a remote PPTP client 86
4.12 Call Home 88
4.12.1 Set up Call Home candidate 88
4.12.2 Accept Call Home candidate as Managed Console Server on CMS 89
4.12.3 Calling Home to a generic central SSH server 90
FIREWALL, FAILOVER & OoB ACCESS 92
5.1 Dialup Modem Connection 92
5.2 OoB Dial-In Access 92
5.2.1 Configure Dial-In PPP 92
5.2.2 Using SDT Connector client 95
5.2.3 Set up Windows XP/ 2003/Vista/7 client 95
5.2.4 Set up earlier Windows clients 95
5.2.5 Set up Linux clients 96
5.3 Dial-Out Access 96
5.3.1 Always-on dial-out 96
5.3.2 Failover dial-out 97
5.4 OoB Broadband Ethernet Access 99
5.5 Broadband Ethernet Failover 100
5.6 Cellular Modem Connection 101
5.6.1 Connect to the GSM HSUPA/UMTS carrier network 102
5.6.2 Connect to the CDMA EV-DO carrier network 103
5.6.3 Verify cellular connection 105
5.7 Cellular Operation 107
5.7.1 OoB access set up 107
5.7.2 Cellular failover setup 108
To Next Page
Loading...
Need help?
General
